The pattern of blinds is becoming more and more diversified, but the installation and use of similar ways, the appearance of diversity can be better decorated, followed by manual blinds and motorized blinds, so what is the manual installation of blinds?curtain designs How to pull up the shutters? Don't worry, the following editorial explains it to you, let's take a look.

Manual blinds installation method:

1. determine and measure the size and depth of the window.

Before the blinds installation work, we life have to measure the size. For example: measure what is the suitable width of the outer frame? What is the suitable height of the outer frame?focal shade In fact, it is to measure the height and width of the inner frame at the same time is also used in this way. In addition, the window depth to learn to measure the technology is also the development of a vital part of the teaching, but the enterprise because for different installation methods and methods of research requirements of the student window depth is also different, so the need for homeowners can be discussed with the designer of an accurate depth of the window.

2. Installation method

Generally speaking, the flat way is preferred, and this kind of decoration is generally more suitable for small windows or two windows, single window installation. The sliding type is more suitable for installing windows due to its small footprint. This folding window is suitable for the installation of multiple layers, and it is more suitable for general home as a partition or floor window.

3. Insertion slot width

In fact, the installation of blinds also need to consider the width of the window frame, the national standard minimum is 5+19A+5 thickness of the shutter glass.custom blinds However, most of the electric blinds on the market now use 27A blinds, with the thickness of two pieces of 5mm tempered glass, at least 37mm of hollow layer is needed.

How do I pull the blinds up?

1. The left side is dimmed to help pull the cord

To the left of the shutter is a dimmer bar with a Gala cord. Just twist the dimmer bar to the left or right to a certain degree and light will enter the room.

2. Two pull ropes

If the shutter is through two pull ropes, generally the left side of the rope is pulled up, the right side is pulled down, as long as the process of pulling our left side of the rope all the way down, the shutter is pulled up on their own, the same a right side of the downward pull, the shutter structure will choose to put down.